Industrial machinery parts are of course cleaned with ultrasonic cleaning machine. General mechanical parts before assembly, assembly, after assembly need to be cleaned, some parts in the trial run according to the need is also to be cleaned. The purpose of cleaning parts is to remove all kinds of dirt left on the surface, such as cast sand, iron chips, rust, abrasives, oil stains, dust, etc..
Cleaning the cleanliness of the parts will directly affect the quality and service life of the construction machinery assembly, so the cleaning of parts is a very important part of the construction machinery assembly. Industrial ultrasonic cleaning machine in the cleaning of the slit, groove, deep holes and blind holes in the surface and internal cleaning of small parts with ease. At the same time, it also has good effect in removing oil, rust and oxide.
The main application scenario of industrial ultrasonic cleaning machine is to clean hardware parts of oil, wax, carbon and dirt. Ultrasonic cleaning of oil stains has natural advantages. The principle of ultrasonic cleaning machine is that the high frequency oscillation signal from the ultrasonic generator is converted into high frequency mechanical oscillation by the transducer and propagated into the cleaning solvent. Ultrasonic waves in the cleaning fluid sparse and dense forward radiation, so that the liquid produces tens of thousands of tiny bubbles, the tiny bubbles in the liquid under the action of the sound field vibration and rupture, can be completely stripped of contaminants from the surface of the product.
