Ultrasonic cleaning machine is how to control the temperature? There are three main methods as follows.
1、CNC panel heating
General laboratory use of CNC ultrasonic cleaning machine, with heating function models, is the CNC button heating. CNC control area to display the current temperature, you can set the temperature value. When the heating value is reached, automatically stop heating. This heating is generally heated with a silicone plate.
2、Temperature controller heating
Split type ultrasonic cleaner can be heated by thermostat according to the use. Use the following method: press the heating switch, the thermostat will display the measurement temperature and control temperature. The upper display is the measurement temperature, the lower display is the control temperature. When the measured temperature is lower than the control temperature, the out light on the thermostat is on, the heating indicator is on, and the device is in heating state; when the measured temperature is higher than the control temperature, the out light on the temperature control instrument is off, the heating indicator is off, and the device stops heating.
Control temperature setting method: press the dial key to set the control temperature, the control temperature is 58 degrees. This type generally uses heating tube heating.
3、Mechanical temperature control
Ordinary desktop ultrasonic cleaning machine generally uses mechanical temperature control, that is, the knob to adjust the temperature, such as D mechanical with heating series ultrasonic cleaning machine, the temperature adjustment range of room temperature -80 degrees.
