Technical characteristics of ultrasonic cleaning machine.
1、Cleaning more thoroughly
Ultrasonic cleaning machine principle shows that this way is very suitable for cleaning the complex shape of the components. This type of parts if cleaned manually, there are many parts are difficult or impossible to clean. Cleaning agent can only dissolve part of the dirt, for stubborn dirt and dirt inside the parts is also unable to. Ultrasonic cleaning machine technology cleaning is a wonderful physical cleaning, as if countless small bombs while blasting to remove the object’s internal and external surfaces, such as combined with the chemical cleaning agent, so you can make the traditional method can not complete the cleaning of the internal surface and internal holes once completed.
2、Save energy
Small parts cleaning currently use gasoline or diesel brushing, so the operating safety factor is very low, easy to cause accidents. And ultrasonic technology cleaning using water-based cleaning agent, there is no accident potential.
3、High efficiency
Just disassemble the parts and put them in the screen material basket of the cleaning machine and press the switch can be cleaned automatically.
4、Low cleaning cost
Because of the high reuse rate of cleaning agent, the purchase of consumables is cheap, in all cleaning methods, cleaning costs can be broadly divided into: equipment costs and consumption costs. Ultrasonic cleaning machine equipment life of about ten years, in addition to the acquisition cost of equipment is higher than manual cleaning and organic alkaline solvent brushing, lower than the gas phase cleaning and high-pressure water jet cleaning.
5、Good cleaning effect
In terms of cleaning methods, the use of industrial cleaning cleaning methods are generally manual cleaning, organic solvent cleaning, steam vapor cleaning, high-pressure water jet cleaning and ultrasonic cleaning, according to the cleaning effect can be clearly distinguished from the cleaning method, ultrasonic cleaning machine is recognized as the current high cleaning efficiency, cleaning effect of good cleaning methods, its cleaning efficiency reached more than 98%, cleaning cleanliness also reached a very High level, and the traditional manual cleaning and organic solvent cleaning cleaning efficiency is only 60%-70%, even the weather cleaning and high-pressure water jet cleaning cleaning efficiency is less than 90%, therefore, in industrial cleaning, ultrasonic cleaning machine with its high efficiency, good results, suitable for large workload cleaning characteristics is undoubtedly a good choice for cleaning, which is why all the high requirements for cleanliness of the industry.
Ultrasonic cleaning machine cleaning principle.
Ultrasonic cleaning machine is issued by the ultrasonic generator high-frequency oscillation signal, through the transducer into a high-frequency mechanical oscillation and spread to the medium – cleaning solvent, ultrasound in the cleaning fluid sparse and dense forward radiation, so that the liquid flow and produce tens of thousands of tiny bubbles. These bubbles in the ultrasonic longitudinal propagation of negative pressure zone formation, growth, and in the positive pressure zone quickly closed. In this process is called “cavitation” effect, bubble closure can form more than 1000 air pressure instant high pressure, continuous generation of instant high pressure is like a series of small “explosion” constantly impact the object surface, so that the object surface and crevices in the dirt quickly peeled off, so as to achieve the purpose of object surface cleaning.
